Strat Parts, Gilmour Black Strat, Loaded Strat Pickguard

CSS Horizontal Sub Menu Css3Menu.com

PayPal, MasterCard, VISA, American Express, Discover Payments Accepted
 
Item # 5013

Fully Loaded Complete Strat® Pickguard Assembly
Seymour Duncan Antiquity II Surfer Pickup Set

Seymour Duncan Antiquity II Surfer Pickup Set Strat Pickguard Assembly

Seymour Duncan Antiquity II Surfer Pickup Set Strat Pickguard Assembly

Custom built, complete and fully loaded Seymour Duncan Antiquity II Surfer pickup set Strat® pickguard assembly.  Includes everything ready to drop in to your favorite Strat® by simply hooking up the hot wire (audio) and ground wires.  Includes genuine Seymour Duncan Antiquity II Surfer pickup set, genuine Fender® pickguard, knobs, switch tip along with top quality CTS potentiometers, Orange Drop polyester film tone capacitors and a CRL pickup selector switch.  The Antiquity II Surfer pickup set comes with the Custom Bridge and Rw/Rp middle pickups. 

The standard 11 hole pickguards are fully aluminum foil shielded as they come from Fender, click for illustration.

The '56/'59, '57, '62 and '65 vintage pickguards require a separate aluminum pickguard shield which is to be added extra if so desired. Use separate "Add to Cart" buttons found below for addition of these pickguard shields.

We offer a few assembly selection options for your pickguard to appeal to your particular Strat® body color.

Pickguard Assembly Specifications / Options

  • Pickguard Selection Options: 
    • Standard 11 Hole, 3 Ply Black (B/W/B)
    • Standard 11 Hole, 3 Ply White (W/B/W)
    • Standard 11 Hole, 3 Ply Parchment (P/B/P)
    • Standard 11 Hole, 3 Ply Mint Green (M/B/M)
    • Standard 11 Hole, 1 Ply Solid Black
    • '65 Vintage 11 Hole, 3 Ply Eggshell, (E/B/E)
    • '62 Vintage 11 Hole, 3 Ply Black (B/W/B)
    • '62 Vintage 11 Hole, 3 Ply White (W/B/W)
    • '62 Vintage 11 Hole, 3 Ply Mint Green (M/B/M)
    • '57 Vintage 8 Hole, 1 Ply White
    • '56/'59 Vintage 8 Hole, 1 Ply Eggshell
    • '57 Vintage 8 Hole, 3 Ply Black (B/W/B)
  • Pickup Set: Genuine Seymour Duncan Antiquity II Surfer Set. Custom Surfer Bridge, Surfer Rw/Rp Middle, Surfer Neck.
  • Pickup Selector Switch:
    • CRL 5-Way.
  • Potentiometers: Three 250K CTS Audio Taper.
  • Tone Capacitor: Orange Drop Polyester Film Capacitor Options.  Here is a link to a video that explains How Tone Capacitors Work.
    • 0.047 uF
    • 0.033 uF
    • 0.022 uF
    • 0.1 uF
  • Control Knobs, Pickup Covers and Switch Tip Color Options:
    • White
    • White with "Seymour Duncan" Logo Pickup Covers
    • Parchment
    • Parchment with "Seymour Duncan" Logo Pickup Covers
    • Vintage White
    • Aged White
    • Black
    • Black with "Seymour Duncan" Logo Pickup Covers
  • Pickup Tone Controls:  With standard Strat® wiring the bridge pickup does not have a tone control, only the middle and neck pickups have a tone control.  However, we offer 5 alternate pickup tone control selections to choose from to enhance your tonal shaping.
    1. Standard Strat® wiring: Separate tone control for the middle pickup. Separate tone control for the neck pickup. No tone control for the bridge pickup.
    2. Separate tone control for the bridge pickup. Middle and neck pickups share a tone control.
    3. Separate tone control for the neck pickup. Bridge and middle pickups share a tone control.
    4. Separate tone control for the bridge pickup. Separate tone control for the neck pickup. No tone control for the middle pickup.
    5. Separate tone control for the bridge pickup. Separate tone control for the middle pickup. No tone control for the neck pickup.

California Proposition 65 Warning

Take your Stratocaster on a ride through decades of seminal genre defining tones from rock, surf, country and blues with the Antiquity II Surfer vintage Stratocaster pickups. The Antiquity II Surf Neck provides that smooth and chimey bounciness that only a Stratocaster can produce. Our specially calibrated ALNICO 5 rod magnets and custom scatter wound coil give the treble attack a subtle sweetness without losing any of the harmonic sparkle.

The middle pickup in the set is Rw/Rp for the perfect hum-free cluck in the 2 and 4 positions. The Antiquity II Surf for Strat Custom Bridge pickup is wound to have extra midrange and output for a more versatility. We wind these 50% hotter for more mid's, and then slightly soften the treble attack by degaussing the alnico 5 rod magnets. It cuts through the mix much more easily than a traditional Strat bridge pickup, while still retaining that classic Stratocaster tonal character. Solos will jump out more musically, and chords will ring with the perfect amount of midrange sparkle.

Hand built in Seymour Duncan's Custom Shop, each pickup is aged to look and sound like a 1960s original. We use vintage correct blue/yellow cloth pushback lead wire, light gray bottom flatwork, and custom aged covers for just the right look. The Antiquity II Surfer vintage Strat pickups are all lacquered and wax potted.

Seymour Duncan Antiquity II Surfer Pickup Set Strat Pickguard Assembly
Representative photograph.  '57 vintage, 1 ply, 8 hole pickguard, with aged white accessories. 

Seymour Duncan Antiquity II Surfer Pickup Set Strat Pickguard Assembly
Representative photograph of a completed pickguard assembly. Does not depict actual pickup set being offered here. Shown as a similar product representation as a completed assembly may appear.

Seymour Duncan Antiquity II Surfer Pickup Set Strat Pickguard Assembly
Representative photograph of a completed pickguard assembly.

 

Important Note: If you are selecting your pickguard assembly to be built with one of the '56/'59, '57, '62 or '65 vintage pickguards they are unshielded as provided by Fender. To have the genuine Fender® full coverage aluminum pickguard shielding plate or '57 control area aluminum shielding plate installed please add it separately below using the appropriate "Add to Cart" button.  These separate aluminum shielding plates are specific and authentic to how Fender was shielding their pickguard assemblies during the '50s and early to mid 60's.  The '57 pickguard typically will have the control area aluminum shielding plate installed, the '62 and '65 pickguard typically will have the full coverage aluminum shielding plate installed.

Body Ground Connection:  Most of the modern American Strat® bodies (not vintage re-issue Strat's) have a ground wire connection inside the conductive paint shielded control cavity that is fastened down to the body with a small wood screw.  Click here for an illustration of this body ground connection. Most Mexican Strat® bodies we have encountered do not have this body ground connection.  Unless your bodies control cavity is shielded and you plan on connecting a ground wire from the electronics to the shielded control cavity then select "No" for this option. If you select YES for the "Body Ground" option and do not have the solder lug (ring eyelet) and mounting screw to attach this wire to your body, then you can add it to your order here -->

Select Your Pickguard Assembly Options

Pickguard:
Accessories Color:
Tone Capacitor:
Pickup(s) Tone Controls:
Body Ground Connection:
Price: $440.00
Use the following "Add On" options for pickguard shielding with the '57 or '62 pickguards that are unshielded.
To add the full coverage aluminum pickguard shielding plate for the '62 or '65 vintage pickguard. $17.00 Up charge.
* You can't add this shielding to any of the Standard 11 Hole pickguards.
To add the aluminum pickguard control area shielding plate for the '56/'59 or '57 vintage pickguard. $7.00 Up charge.
* You can't add this shielding to any of the Standard 11 Hole pickguards.
Upgrade with a customized set of '62 Style Green Lettered & Numbered Control Knobs: $30.00 Up charge. 

IMPORTANT INFORMATION ABOUT OUR CUSTOM BUILT COMPLETE PICKGUARD ASSEMBLIES

Typical turn-around time from order placement until your complete pickguard assembly will be ready to ship is up to 31 days.

All custom built pickguard assemblies sales are final. No returns, refunds or exchanges due to the unique nature of the customized options you select for your particular assembly. Each pickguard assembly is custom built on an "As Ordered" basis for each customer with your specific and unique assembly options selected at the time of purchase. All pickguard assemblies are completely tested to ensure 100% correct operation.

 

Navigation   Notices
 
 
  Home All prices are subject to change. All orders are subject to product availability. All prices are in USD.
OverDrive Custom Guitar Works reserves the right to cancel any order.

Fender®, Strat®, Stratocaster®, Tele® & Telecaster® are registered trademarks of the Fender Musical Instrument Corporation. OverDrive Custom Guitar Works is not affiliated with Fender Musical Instrument Corporation.

All content and photography are the sole property of OverDrive Custom Guitar Works and are not public domain.
Unauthorized duplication or usage of any content of the OverDrive Custom Guitar Works web site is strictly prohibited.

OverDrive Custom Guitar Works is an authorized Fender® parts and accessories dealer, authorized Seymour Duncan dealer and an authorized Allparts dealer.
  About Us
  Contact Us
  Policies & Returns
  USA Shipping Info
  International Shipping Info
  Help
  Site Map
  Follow Us
Connect With Us On FaceBook

.
 
209-565-2112
9 am - 4 pm M-F
Pacific Time
OverDrive Custom Guitar Works Stratocaster Parts
      © 2009-2024 OverDrive Custom Guitar Works, Stockton, CA 95204 USA