![099-9002-921 0999002921 - Fender Stratocaster Replacement Neck 22 Medium Jumbo Frets, Maple Fingerboard, Compound Radius 9.5" to 14"](/images/fender_logo93x35_odcgw.jpg)
Genuine
U.S.-made Fender® Stratocaster® guitar maple
neck. Features include a comfortable “modern C”
profile and 9.5”-14" compound radius maple
fingerboard with 22 medium jumbo frets and
rolled edges, Bi-Flex™ truss rod, pre-slotted
synthetic bone nut and a tinted satin urethane
back and gloss headstock face. String tree is not included and its mounting
hole will need to be drilled.
Because Fender genuine
replacement necks have not been mounted to
guitar bodies, nut slots must be cut by
qualified personnel. Other installation
processes may be required, such as fret work,
fitting the neck to the neck pocket, and other
instrument setup procedures. Your local FMIC
Authorized Service Center can install genuine
replacement necks
This replacement neck is for a Fender® or Squier®
by Fender® guitar.
Price: $569.99
(USA Shipments Only)
Specifications and Features:
- Fingerboard: Maple
- Number of Frets: 22
- Fret Size: Medium Jumbo
- Neck Shape: Modern "C"
- Neck Material: Maple
- Neck Finish: Tinted
Satin Urethane Back with Gloss Headstock
Face
- Fingerboard Radius:
9.5"-14" Compound Radius (241 mm-355.6 mm)
- Scale Length: 25.5" (648
mm)
- Nut Material: Synthetic
Bone (Melamine)
- Nut Width: 1.6875" (42.8
mm)
- Position Inlays: Black
Dot
- Truss Rod: 1/8" Truss
Rod Adjustment Nut
- 6 Pre-Drilled Tuning
Machine Holes with 2-Guide Pin Holes for
Each Tuning Machine
- Each neck is serialized
and stamped during quality inspection
- Walnut "skunk" stripe on
back of neck
- Single string tree
design (No pilot holes drilled for string
tree)
- Fender® Foil Logo Decal
with "Made in U.S.A." on back of headstock
Note: Neck is
pre-drilled with five holes to accommodate
either a traditional 4-bolt neck mounting design
OR an offset (asymmetrical) 4-bolt design. Neck is compatible
with American Deluxe, American Standard and
most Mexico Standard bodies.
Each nut is pre-slotted with “pilot” string
location grooves to make spacing a breeze when
performing the final string slot filing. (Please
note: Final string slot filing and nut shaping
modification is required to ensure proper fit
and performance.)
Measurements:
- Peg Hole Diameter -
.404” (10.26 mm)
- Headstock Thickness
- .540” (13.71 mm)
- Thickness at the 1st
Fret - .820” (20.82 mm)
- Thickness at the
12th Fret - .870” (22.09 mm)
Recommended
Tuning Machines:
|