|
An OverDrive Custom Guitar Works
Exclusive
RIGHT HANDED
New
for winter 2018 is our fat Strat®
HSS black 1 ply 0.120" Acrylic pickguard with our signature
feature of the rounded and polished perimeter edge.
This particular HSS pickguard is
designed exclusively for
the Fender Shawbucker Humbucking bridge pickup
that uses 3 screws for mounting along with two
single coil pickups. The Shawbucker is a
little shorter in length than a typical Fender
Humbucker and we have taken that into account by
making this pickguards bridge cut-out slightly
smaller in length.
Your typical Strat® pickguard
will have a
45° beveled edge that is found on just about any Strat® for the
last 50+ years. The rounding and polishing of the
perimeter edge of a pickguard gives it a
presence and style that really sets it apart
from the rest, see photograph below.
These pickguards are
the same style found on Gilmour's Black
Strat® except these do not
have the small slot for the recessed mini-toggle switch
and these are for a Shawbucker and two single coil
pickups.
This pickguards middle and
neck pickup cut-outs are dimensioned for standard single
coil pickups.
This pickguard has a standard 11 hole
mounting pattern, the selector switch and single
coil pickup mounting holes are not countersunk
and require Phillips round head
mounting screws. Potentiometer mounting holes
are standard 3/8" in diameter. Each pickguard is copper foil
shielded in the control region only.
Pickup Mounting
Specifications
- Neck Pickup: Standard. Single Coil
- Middle Pickup:
Standard Single Coil
- Shawbucker Bridge Pickup
Cut-Out: 2.70" x 1.475"
- Bridge Pickup Mounting:
Spacing 3.10"
Each pickguard is
custom
manufactured on an "As
Ordered" basis. There is up to 28 day build time on
these pickguards. No returns or exchanges
so be sure of your pickups compatibility and
mounting requirements before
ordering.
Price: $105.00
|
